IDX-2

1. Power up for the first time Plug IDX-2 into a standard 5v USB-C power supply using the rear USB socket.

IDX-2 will glow white, then blue. This indicates it's ready for WiFi setup.

2. Connect to temporary WiFi access point IDX-2 will create a temporary WiFi network for configuration.

On your phone or computer, join the WiFi network named IDX-setup. A window should open automatically. If not, visit http://192.168.4.1 in your browser. Use the password: analoguedeskco

3. Configure WiFi In the IDX-2 WiFi Setup page, once the Wifi Scanning has completed, select your SSID from the list and enter your WiFi password. Click Connect.

Once connected, IDX-2 will glow light blue, and the device's IP address will be displayed.

This address is used to access the IDX-2 Dashboard where you can configure the data source, ambient lighting and other settings.

Copy the address using the COPY button, and press FINISH SETUP.

The page will close as IDX-2 initializes.

4. Access IDX-2 Dashboard Ensure your phone/computer is back on your main WiFi network.

Wait 30 seconds for IDX-2 to complete its initialisation.

Visit the copied IP address in your browser.

Backup Option: If the address is not found, locate IDX-2's assigned IP address using your router admin page or a network scanner (like Fing). Look for "IDX-2" or "Espressif". Enter it into a browser address bar.

5. Configure IDX-2 By default, IDX-2 is set to track the current time.

Select MODE to choose what data source IDX-2 should use. Select AMBIENCE to adjust the lighting effect, including night mode.